The Honeywell UC100E1030 Ultraviolet Air Treatment System Replacement Lamp for use with:
Honeywell UV100 Ultraviolet Air Treatment Systems.
The Honeywell UC100E1030 SnapLamp comes complete as a knob (blue) and bulb assembly. Future replacement only requires replacing the bulb with part# UC36W1006. The overall bulb length is approximately 16 inches and has two bi-lateral tubes approximately ¾" in diameter. The bulb is snapped or twisted into the knob.
UV Replacement Bulb/Handle Assembly
UV100E Info Sheet
UV100E Operating Guide
UV100A Operating Guide
UV100E Enviracaire Elite Operating Guide
SnapLamp Replacement w/ Blue Handle for Models:
UV100E3007
UV100A1059
UV100E1035
UV100E1019 (2 REQUIRED)
UV100A1018 (2 REQUIRED)
UV100A2009 (2 REQUIRED)
UV100E2008 (2 REQUIRED)
Replaces:
UC100A1054
UC100E1014, Tan Handle (REQUIRES 2-UC100E1030)
UC100E1013, Tan Handle (REQUIRES 2-UC100E1030)
Electrical Rating: 36 Watts
Replacement: Annual replacement is recommended.
Note: Although the lamp may function past one year its effectiveness is significantly diminished as the bulb begins to wear out.
SL* - Honeywell changed production on Replacement Lamps to the new SnapLamp design. The first replacement of a non-SnapLamp design should be with a bulb and handle assembly. After the first replacement only the bulb will need to be replaced. The easiest way to identify a SnapLamp device is to look at the label on the lamp handle. If the replacement bulb is identified as UC18W1004 or UC36W1006 then it is a SnapLamp and just the replacement bulb can be ordered. If you cannot easily remove the bulb from the handle then you do not have a SnapLamp model. If not, please order the bulb with handle assembly model.