Honeywell UC36W1006 Ultraviolet Air Treatment System Replacement Lamp for use with:
Honeywell UV100 Ultraviolet Air Treatment Systems.  

The Honeywell UC36W1006 SnapLamp bulb is a replacement bulb only and does not include a knob. The overall bulb length is  approximately 16 inches and has two bi-lateral tubes approximately ¾" in diameter. The bulb is snapped or twisted into the knob. 

UV Replacement Bulb/Handle Assembly

UV100E Info Sheet

UV100E Operating Guide

UV100A Operating Guide

UV100E Enviracaire Elite Operating Guide

SnapLamp Replacement Bulb for use in Models:
UV100E3007
UV100A1059
UV100A1018 (2 REQUIRED)
UV100A2009 (2 REQUIRED)
UV100E2008 (2 REQUIRED)

Used in:
UC100E1030 SnapLamp Knob

Replaces:
UC100A1054
UC100E1014, Tan Handle (REQUIRES 2-UC36W1006)
UC100E1013, Tan Handle (REQUIRES 2-UC36W1006) 

Electrical Rating: 36 Watts

Replacement: Annual replacement is recommended.
Note: Although the lamp may function past one year its effectiveness is significantly diminished as the bulb begins to wear out.

SL* - Honeywell changed production on Replacement Lamps to the new SnapLamp design. The first replacement of a non-SnapLamp design should be with a bulb and handle assembly. After the first replacement only the bulb will need to be replaced. The easiest way to identify a SnapLamp device is to look at the label on the lamp handle. If the replacement bulb is identified as UC18W1004 or UC36W1006 then it is a SnapLamp and just the replacement bulb can be ordered. If you cannot easily remove the bulb from the handle then you do not have a SnapLamp model. If not, please order the bulb with handle assembly model.